Mostrando postagens com marcador scania. Mostrar todas as postagens
Mostrando postagens com marcador scania. Mostrar todas as postagens

quinta-feira, 18 de fevereiro de 2016

Scania R470 1/32 (Welly)


The Scania G/P/R-Series, formerly Scania 4-series, is a truck model range which was produced by Scania in 1995 as the 1996 model. It was the successor of the 3-series and it came in five engine combinations and four chassis types. Production of Scania 4-series was stopped after its successors P-series, R-series and G-series were starting in 2004.

The engine sizes are - as usual for the 1-4 series - shown in the model name with a number constructed by the cylinder volume in litres followed by the generation of truck. This way a 14-litre engine in the 4-series will be a 144.

The letter, following the number describes the chassis type, but in the 4-series this code changed compared to former series (L, D, C and G in 4-series). The 3-digit number on the opposite corner in the front stands for horse power. This ranged up to 530 bhp, dwarfed by Scania's top of the line truck with 730 bhp.

The 4-series changed the well-known Scania front look from quite square and lined to new round and curved shapes. The new cab design also split the grill horizontally in two, making the lower part flip down to make a step usable for better reach when cleaning windows or eventually as a bench while waiting somewhere.

sexta-feira, 18 de setembro de 2015

Scania 4-series model 124 400cv - Guisval



The Dodge Challenger is the name of three different generations of automobiles marketed by the Dodge division of Chrysler. The Dodge Silver Challenger was produced from 1958 to 1959. From 1969 to 1974, the first generation Dodge Challenger pony car was built using the Chrysler E platform, sharing major components with the Plymouth Barracuda. The second generation, from 1978 to 1983, was a badge engineered Mitsubishi Galant Lambda. The third, and current generation, was introduced in early 2008 as a rival to the evolved fifth generation Ford Mustang and the fifth generation Chevrolet Camaro. For 1971, the Challenger line up was modified to include a new model, the "Challenger Coupe" with either a I6 or V8 engine, and as the most basic version it had fixed in position quarter windows and a basic black steering wheel with horn button.[15] The performance model was the R/T (Road/Track), with a 383 cu in (6.28 L) "Magnum" V8, rated at 335 bhp (249.8 kW); 300 bhp (223.7 kW) for 1971, due to a drop in compression. The standard transmission was a 3-speed manual. Optional R/T engines were the 375 bhp (279.6 kW) 440 cu in (7.2 L) Magnum, the 390 bhp (290.8 kW) 440 CID Six-Pack and the 425 bhp (316.9 kW) 426 cu in (7.0 L) Hemi. The R/T was available in either the hardtop or convertible. For 1970 only, base hardtop and R/T hardtop models could be ordered with the more luxurious SE specification, which included leather seats, a vinyl roof, a smaller 'formal' rear window, and an overhead interior console that contained three warning lights (door ajar, low fuel, and seatbelts).[16] The Challenger R/T came with a Rallye instrument cluster that included a 150 mph (240 km/h) speedometer, an 8,000 rpm tachometer,[17] 1972–1974 tachometer went to 7,000 rpm and an oil pressure gauge. In 1972, the R/T badging was dropped and these models were called "Rallye", although they were never badged as such. The Rallye model featured a faux brake vent on the fenders. The shaker hood scoop was not available after 1971.

Photos of the minisinfoco or lamleygroup, best sites of the diecast, enjoy!

terça-feira, 15 de setembro de 2015

Scania 4-series model 144 530cv - Guisval



The Scania G/P/R-Series, formerly Scania 4-series, is a truck model range which was produced by Scania in 1995 as the 1996 model. It was the successor of the 3-series and it came in five engine combinations and four chassis types. Production of Scania 4-series was stopped after its successors P-series, R-series and G-series were starting in 2004.
The 4-series changed the well-known Scania front look from quite square and lined to new round and curved shapes. The new cab design also split the grill in two horizontally, making the lower part flip down to make a step usable for better reach when cleaning windows or eventually as a bench while waiting somewhere.