'70 Plymouth Road Runner Fast Furious (Jada 1:24)

The Plymouth Road Runner is a mid-size car with a focus on performance built by Plymouth in the United States between 1968 and 1980. By 1968, some of the original muscle cars were moving away from their roots as relatively cheap, fast cars as they gained features and increased in price. Plymouth developed the Road Runner to market a lower priced, basic trim model to its upscale GTX.

Plymouth paid $50,000 to Warner Bros.-Seven Arts to use the Road Runner name and likeness from their Wile E. Coyote and The Road Runner cartoons (as well as a "beep, beep" horn, which Plymouth paid $10,000 to develop).[1] The Road Runner was based on the Chrysler B platform (the same as the Belvedere and Satellite), as a back-to-basics mid-size performance car.

The 1970 model year brought new front and rear end looks to the basic 1968 body, and it would prove to be another success. Updates included a new grille, a cloth & vinyl bench seat, hood, front fenders, quarter panels, single-piston Kelsey-Hayes disc brakes (improved from the rather small-rotor Bendix 4 piston calipers of '68 - '69 ), and even non-functional scoops in the rear quarters.[6] The design and functionality of the Air Grabber option was changed. A switch below the dash actuated a vacuum servo to slowly raise the forward-facing scoop, exposing shark-like teeth on either side. "High Impact" colors, with names like In-Violet, Moulin Rouge, and Vitamin C, were options available for that year. The engine lineup was left unchanged although a heavy-duty three-speed manual became the standard transmission, relegating the four-speed to the option list along with the TorqueFlite automatic. This was to be the second and last year of the Road Runner convertible, with only 834 made. The new high-back bucket seats shared with other Chrysler products which featured built-in headrests.

The 440 Six Barrel remained an option for 1970. The 1969 "M" Code Edelbrock aluminum intake was replaced by a factory-produced cast iron piece; however there were some early cars built prior to January 1, 1970 that were equipped with the left over aluminum Edelbrock intake from the year prior.

Sales of the 1970 Road Runner dropped by more than 50 percent over the previous year to around 41,000 units (about 1,000 ahead of Pontiac's GTO but still about 13,000 units behind Chevy's Chevelle SS-396/454). This would also be the last year of the Road Runner convertible with 834 total production. Only 3 Hemi (R) code Road Runner convertibles were built (plus 1 to CANADA). The declining sales of Road Runner and other muscle cars were the result of a move by insurance companies to add surcharges for muscle car policies - making insurance premiums for high-performance vehicles a very expensive proposition. Also, Plymouth introduced another bargain-basement muscle car for 1970, the compact Duster 340 which was powered by a 275 hp (205 kW) 340 4BBL V8 which in the lighter-weight compact A-body could perform as well if not better than a 383 Road Runner. Furthermore, the Duster 340 was priced even lower than the Road Runner and its smaller engine qualified it for much lower insurance rates.

'17 Acura NSX（ホットホイール2016シリーズ）

アキュラ（アキュラ・アキュラ？）は、日本の自動車メーカー、ホンダの高級車です。このブランドは、1986年3月に米国とカナダで発売され、高級車、高性能車、高性能車を販売しています。 1991年に香港、2004年にメキシコ、2006年に中国、2014年にロシア、2015年にクウェートに導入された。ホンダは2008年に国内市場にアキュラを導入する予定であったが、 2008年の金融危機の結果として保留された。

アキュラは、日本初の自動車用高級ブランドとしての差別を受けています。アキュラの創設は、高級車を販売していたホンダクリオと呼ばれるJDMホンダディーラー販売チャネルの導入、以前に設立されたホンダVernoに続いて、ホンダプリモに続く翌年に導入されました。最初の数年間、Acuraは米国で最も売れていた高級ブランドのひとつだった。 1990年代半ばから後半にかけて販売は減少しましたが、劇的な再設計と新型モデルの導入により、2000年代初めに復活しました。

創業以来、アキュラは自動車産業の先駆者でした。 1980年代後半、同社初のフラッグシップ車であるレジェンドの成功は、日本の自動車メーカートヨタと日産がそれぞれ独自の高級ブランド、レクサスとインフィニティを投入するよう促しました。 1990年に発売された中型エキゾチックなスポーツカーであるNSXは、ヨーロッパのスポーツカーに代わる信頼性の高い実用的な代替車を提供し、北米市場にはホンダのVTEC可変バルブタイミングシステムを導入しました。 1993年伝説のクーペはホンダが6速マニュアルトランスミッションを最初に使用し、タイプIIエンジンと組み合わされています。 1990年代後半には、軽量化、剛性と低サスペンション、高出力のVTECエンジンを特長とする、コンパクトなIntegraクーペのType Rバージョンを生産しました。

2000年代初めに、同社の最初のすべてのオリジナルSUVであるMDXとIntegraクーペとセダンを置き換えた2つのモデルであるRSXとTSXを含む新しいモデルがAcuraによって導入されました。この10年間で、RSX、CL、TLのタイプSバージョンがブランドのラインナップに追加されました。アキュラの2005年のRLフラッグシップは、トルクベクトル化全輪駆動システムであるSH-AWDを発表しました。クロスオーバーSUVの2007 RDXは北米初のターボチャージャー型のホンダエンジンを搭載しています。 2010年代、アキュラは、ILX、TLX、RLXなどの新モデルをデビューしました。後者はAcuraのJewel Eye LEDヘッドライトを発表しました。第2世代のNSXは2015年に発売され、ツインターボエンジンのミッドエンジン、9スピードのデュアルクラッチトランスミッション、スポーツハイブリッドSH-AWDを搭載しています。.

'17 For GT (Hot Wheels 2016 series)

The Ford GT is an American mid-engine two-seater sports car that was produced by Ford for the 2005 and 2006 model years. The designers drew inspiration from Ford's GT40 racing cars of the 1960s.
A completely redesigned Ford GT is planned to enter production in 2016 as a 2017 model.
At the 2015 North American International Auto Show and at the unveiling of Forza Motorsport 6, a new Ford GT was introduced and is set to be produced and released in 2016. It will mark 50 years since the GT40 won the 1966 24 Hours of Le Mans and has run successfully in the 2016 24 Hours of Le Mans to mark the anniversary, winning their class.
Ford GT at the 2015 Geneva Motor Show
The car is to be powered by a newly designed 3.5 liter twin-turbocharged EcoBoost V6 engine making over 600 hp (450 kW). According to Ford, "the GT will exhibit one of the best power-to-weight ratios of any production car," thanks to its lightweight carbon fiber construction. Underpinning the GT is a carbon fiber monocoque bolted to aluminum front and rear subframes covered in carbon fiber body panels. The car also has racing inspired pushrod suspension, active aerodynamics, and dihedral doors. The windshield of the vehicle is made of Gorilla Glass manufactured by Corning, which is also used for smartphone screens. Gorilla Glass is used to reduce the weight of the vehicle by allowing for a thinner windscreen with the same strength.

Beginning in December 2016, Ford plans to build the GT at a rate of one car per day until October 2020. 2017 and 2018 model year vehicles will be reserved for selected GT buyers, 2019 vehicles for buyers passed over in the initial selection process, and 2020 vehicles for new customers.

Wrecker tow truck (Maisto)

Iveco Ferrari (New Ray 1/87)

The Iveco Stralis is a heavy-duty truck produced by the Italian manufacturer Iveco since 2002. The Stralis replaced theEuroStar and EuroTech models; it covers the range above the Eurocargo, between 19 and 44 tonnes. The fire version of the Stralis released with the German based Iveco Magirus.

In 2007, the Stralis received minor changes to cabin and front of the vehicle.^[1] All models have the EuroTronic gearbox, which have full or semiautomatic modes. The original Stralis, introduced in 2002, was the first heavy truck with an automated gearbox as standard equipment.^[2]

All engines are four-valve straight-6 with modern pump nozzle injection.

Different performance levels from three different capacity variants are available:

• Cursor 8, 7.8 l capacity: 228-265 KW (310-360 PS)
• Cursor 10, 10.3 l capacity: 309-331 KW (420-450 PS)
• Cursor 13, 12.9 l capacity: 368-412 KW (500-560 PS)

All engines are equipped with a high performance decompression exhaust brake known as Iveco Turbobrake.

Long Gone (Hot Wheels Boulevard Series)

CONVOY CUSTOM (Hot Wheels 2013 Pop Culture Series - Magilla)

Drag Dairy (Hot Wheels Collector Edition)

'73 BMW 3.0 CSL Race Car Black Model (Hot Wheels 2016)

The BMW New Six CS (internal name BMW E9) was a two-door coupé built for BMW by Karmann from 1968 to 1975. It was developed from the New Class-based BMW 2000 CS coupé, which was enlarged to hold the BMW M30 straight-6 engine used in the E3 sedan.

The E9 platform, especially the 3.0 CSL homologation special, was very successful in racing, especially in European Touring Car Championship and the Deutsche Rennsport Meisterschaft. This helped to establish BMW's status as a sporty driver's car.

Introduced in May 1972, the 3.0 CSL was a homologation special built to make the car eligible for racing in the European Touring Car Championship. 1,265 were built.

The "L" in the designation meant leicht (light), unlike in other BMW designations, where it meant lang (long). The lightness was achieved by using thinner steel to build the unit body, deleting the trim and soundproofing, using aluminium alloy doors, bonnet, and boot lid, and using Perspex side windows. The five hundred 3.0 CSLs exported to the United Kingdom were not quite as light as the others, as the importer had insisted on retaining the soundproofing, electric windows, and stock E9 bumpers on these cars. The CSL was never sold in the United States.

Initially using the same engine as the 3.0 CS, the 3.0 CSL was given a very small increase in displacement to 3,003 cc (183.3 cu in) by increasing the engine bore by one quarter of a millimetre. This was done in August 1972 to allow the CSL to be raced in the "over three litre" racing category, allowing for some increase in displacement in the racing cars. In 1973, the engine in the 3.0 CSL was given another, more substantial increase in displacement to 3,153 cc (192.4 cu in) by increasing the stroke to 84 mm (3.3 in). This final version of the 3.0 CSL was homologated in July 1973 along with an aerodynamic package including a large air dam, short fins running along the front fenders, a spoiler above and behind the trailing edge of the roof, and a tall rear wing. The rear wings were not installed at the factory, but were left in the boot for installation after purchase. This was done because the wings were illegal for use on German roads. The full aero package earned the racing CSLs the nickname "Batmobile".

Chris Amon, Winner of 6 Hours Race 1973 at Nürburgring with BMW 3.0 CSL

In 1973, Toine Hezemans won the European Touring Car Championship in a 3.0 CSL and co-drove a 3.0 CSL with Dieter Quester to a class victory at Le Mans. Hezemans and Quester had driven to second place at the 1973 German Touring Car Grand Prix at Nürburgring, being beaten only by Chris Amon and Hans-Joachim Stuck in another 3.0 CSL. 3.0 CSLs would win the European Touring Car Championship again in every year from 1975 to 1979.

The 3.0 CSL was raced in the IMSA GT Championship in 1975, with Sam Posey, Brian Redman, and Ronnie Peterson winning races during the season.

The first two BMW Art Cars were 3.0 CSLs; the first was painted by Alexander Calder and the second by Frank Stella.

The 3.5 CSL was built for Group 5 racing and BMW won three races in the 1976 World Championship for Makes with this model.

Ford Torino (Hot Wheels)

'73 BMW 3.0 CSL Race Car (Hot Wheels 2016)

The BMW New Six CS (internal name BMW E9) was a two-door coupé built for BMW by Karmann from 1968 to 1975. It was developed from the New Class-based BMW 2000 CS coupé, which was enlarged to hold the BMW M30 straight-6 engine used in the E3 sedan.

The E9 platform, especially the 3.0 CSL homologation special, was very successful in racing, especially in European Touring Car Championship and the Deutsche Rennsport Meisterschaft. This helped to establish BMW's status as a sporty driver's car.
Introduced in May 1972, the 3.0 CSL was a homologation special built to make the car eligible for racing in the European Touring Car Championship. 1,265 were built.

The "L" in the designation meant leicht (light), unlike in other BMW designations, where it meant lang (long). The lightness was achieved by using thinner steel to build the unit body, deleting the trim and soundproofing, using aluminium alloy doors, bonnet, and boot lid, and using Perspex side windows. The five hundred 3.0 CSLs exported to the United Kingdom were not quite as light as the others, as the importer had insisted on retaining the soundproofing, electric windows, and stock E9 bumpers on these cars. The CSL was never sold in the United States.

Initially using the same engine as the 3.0 CS, the 3.0 CSL was given a very small increase in displacement to 3,003 cc (183.3 cu in) by increasing the engine bore by one quarter of a millimetre. This was done in August 1972 to allow the CSL to be raced in the "over three litre" racing category, allowing for some increase in displacement in the racing cars. In 1973, the engine in the 3.0 CSL was given another, more substantial increase in displacement to 3,153 cc (192.4 cu in) by increasing the stroke to 84 mm (3.3 in). This final version of the 3.0 CSL was homologated in July 1973 along with an aerodynamic package including a large air dam, short fins running along the front fenders, a spoiler above and behind the trailing edge of the roof, and a tall rear wing. The rear wings were not installed at the factory, but were left in the boot for installation after purchase. This was done because the wings were illegal for use on German roads. The full aero package earned the racing CSLs the nickname "Batmobile".


Chris Amon, Winner of 6 Hours Race 1973 at Nürburgring with BMW 3.0 CSL
In 1973, Toine Hezemans won the European Touring Car Championship in a 3.0 CSL and co-drove a 3.0 CSL with Dieter Quester to a class victory at Le Mans. Hezemans and Quester had driven to second place at the 1973 German Touring Car Grand Prix at Nürburgring, being beaten only by Chris Amon and Hans-Joachim Stuck in another 3.0 CSL. 3.0 CSLs would win the European Touring Car Championship again in every year from 1975 to 1979.

The 3.0 CSL was raced in the IMSA GT Championship in 1975, with Sam Posey, Brian Redman, and Ronnie Peterson winning races during the season.

The first two BMW Art Cars were 3.0 CSLs; the first was painted by Alexander Calder and the second by Frank Stella.

The 3.5 CSL was built for Group 5 racing and BMW won three races in the 1976 World Championship for Makes with this model.

Mustang, Corvette, Pontiac (Hot Wheels)

'55 Chevy 3100 Panel Truck - Hot Wheels Garage

A panel truck in U.S. and Canadian usage is a small delivery truck with a fully enclosed body. It typically has no rear windows in the rear cargo area and is a van built on a truck chassis.

A body design that appeared very early in history of light-duty trucking was the "delivery car or van was actually the first type of panel truck." A panel truck is similar in function to its smaller cousin the sedan delivery, a station wagon with no backseat and no side windows aft of the front doors. Both types of vehicles are frequently used as delivery vehicles.

Panel trucks are often used by construction and maintenance contractors and were sometimes configured for ambulance and hearse roles. Other variations include canopy express models, which have open display areas behind the driver's seat primarily used by farmers for selling fruits and vegetables. The evolution of sport utility vehicles can be traced to panel trucks, as the Chevrolet Suburban and GMC Yukon, as well as the International Harvester Travelall were passenger versions of these trucks. In modern times minivans have been adapted to some of these functions.

The 2001 to 2010 model year Chrysler PT Cruiser is a compact hatchback wagon whose "design that is reminiscent of panel trucks of the past." The 2007 to 2011 Chevrolet HHR panel model was inspired by the Chevrolet Suburban panel truck, although the HHR is also a compact crossover utility vehicle instead of a full-size truck like the Suburban.

Panel trucks were traditionally purchased by commercial users with specific needs, for which a full-size truck was too large, a station wagon too small and a pickup truck too exposed. Most panel trucks lived hard lives, driven until the cost of repair could no longer be justified before being hauled off to the local scrapyard. This 1955 Chevrolet 3100 panel truck for sale on Hemmings.com is the exception to the rule. Used to haul turkeys between buildings on a turkey farm, this mostly original truck sports the 235.5-cu.in. inline six-cylinder engine mated to a three-speed column-shift manual transmission. It isn’t clear if the truck’s 34,463 miles are legitimate, or if the odometer has been rolled, but it appears to be remarkably well preserved for a vintage truck with a 20-year old “minor restoration.” It even comes complete with turkey cages, turkey decoys and other in-period memorabilia, meaning that the next owner can kick off a collection that includes more than just a vintage truck.

'67 Chevrolet Bel Air (Maisto)

The Chevrolet Bel Air was a full-size automobile that was produced by Chevrolet for the 1950–1981 model years. Initially only the two door hardtops in the Chevrolet model range were designated with the Bel Air name from 1950 to 1952, as distinct from the Styleline and Fleetline models for the remainder of the range. With the 1953 model year the Bel Air name was changed from a designation for a unique body shape to a premium level of trim applied across a number of body styles. The Bel Air continued with various other trim level designations until US production ceased in 1975, production continued in Canada for its home market only through the 1981 model year.

For 1965, the full size Chevrolet was totally restyled, and the cars were stretched to 213.3 in (5,420 mm) overall, even though the wheelbase remained the same. The new stamped grille had a lower extension below the bumper which was slightly veed. Curved window glass and round taillights mounted high characterized the new styling. The interiors were also redesigned and a very attractive dash resulted. The standard V8 remained the 283 CID model of 195 hp (145 kW), but options included two new 396 cu in (6,490 cc) CID engines of 325 and 340 hp (250 kW) and two 409 CID blocks of 400 and 425 hp (317 kW).

The Bel Air utilizes a stainless-steel belt and rocker molding, identifying signature on the rear fenders, a glove compartment light and power tailgate on 9-passenger wagons to distinguish itself from the lower-priced Biscayne series.

For 1967, Full-sized Chevrolets featured a new body with bulging rear fenders, one of this year's styling trends, not necessarily appreciated by everyone. Bel Air 2 and 4-door Sedans continued in addition to 6 and 9-passenger wagons. This year Bel Air featured triple taillights unlike Biscayne's dual units. Standard engines remained the same as the previous year. Optional engines were a 327 CID V8 of 275 hp (205 kW), the 396 CID V8 of 350 hp (260 kW); or the 427 CID V8 of 385 hp (287 kW), plus various speed packages.

The 1965-70 GM B platform is the fourth best selling automobile platform in history after the Volkswagen Beetle, Ford Model T and the Lada Riva.

'57 Chevy Bel Air (Hot Wheels garage series)

The Chevrolet Bel Air was a full-size automobile that was produced by Chevrolet for the 1950–1981 model years. Initially only the two door hardtops in the Chevrolet model range were designated with the Bel Air name from 1950 to 1952, as distinct from the Styleline and Fleetline models for the remainder of the range. With the 1953 model year the Bel Air name was changed from a designation for a unique body shape to a premium level of trim applied across a number of body styles. The Bel Air continued with various other trim level designations until US production ceased in 1975, production continued in Canada for its home market only through the 1981 model year.

In 1957 engine displacement grew to 283 cu in (4,640 cc) with the "Super Turbo Fire V8" option producing 283 hp (211 kW) with the help of continuous (closed loop) mechanical fuel injection. These so-called "fuelie" cars are quite rare, since most Bel Airs were fitted with carburetion. The 1957 Bel Air is among the most recognizable American cars of all time; well-maintained examples, especially Sport Coupes and Convertibles are highly sought after by collectors and enthusiasts. They are roomy, with tastefully restrained, period use tail fins and chrome. A second automatic transmission, Turboglide, was optional. While the original two-speed Powerglide continued unchanged, Turboglide provided a continuously variable gear ratio which made "shifting" imperceptible. The shift quadrant on Turboglide cars followed a "P R N D Gr" pattern.[14][15]

From 1955 to 1957, production of the two-door Nomad station wagon was assigned to the Bel Air series, although its body and trim were unique to that model. Prior to becoming a regular production model, the Nomad first appeared as a Corvette-based concept vehicle in 1954. Chevrolet has since unveiled two concept cars bearing the Nomad name, most recently in 1999. The 1955–1957 Chevrolets are commonly referred to as TriFives.

The 1955-1957s were made in right-hand drive and shipped from Oshawa, Canada, for local assembly in Australia (CKD), New Zealand (SKD), and South Africa. All three model years had a reversed version of the '55 LHD dashboard and did not get the LHD models' 1957 redesign.

55' Buick Century (Maisto)

Buick Century is the model name used by Buick for a line of upscale performance cars from 1936 to 1942 and 1954 to 1958, and from 1973 to 2005 for a mid-size car.

The model name Century came about when Buick was designing its first production automobile capable of reaching a speed of 100 mph. The division needed to come up with a name. One of the Buick executives had returned from a recent trip to the British isles and told the other executives that the British referred to going 100 mph as "doing the century". The executives liked the Century name and it stuck.[citation needed]

The Century was sold as the Buick Regal in Japan, as Toyota owns the right to the name Century.

Introduced in the middle of the 1955 model year the 4-door Buick Century Riviera along with the 4-door Special Riviera and the 4-door Oldsmobile 98 Holiday and 4-door 88 Holiday, were the first 4-door hardtops ever produced. This was the first time "VentiPorts" appeared on the Century, a carryover from the Buick Roadmaster.

In 1955, the California Highway Patrol placed a large fleet order for Century 2-door sedans, a body style unavailable to the general public. It combined the Special 2-door sedan body shell with Century powertrain and trim. Broderick Crawford was shown driving a 2-door Century sedan during the first season of his popular syndicated TV series "Highway Patrol". (In later seasons he'd drive a four-door Century, like his real life counterparts in the California Highway Patrol.) Power brakes were optional.[2] Tubeless tires were new.

For 1955, Chevrolet's full-size model received all new styling and power.The second generation of Bel Air more specifically the 1955 generation was 3456 pounds and was 15 feet. long It was called the "Hot One" in GM's advertising campaign. Chevrolet's styling was crisp, clean and incorporated a Ferrari-inspired grille. Bel Airs came with features found on cars in the lower models ranges plus interior carpet, chrome headliner bands on hardtops, chrome spears on front fenders, stainless steel window moldings,[1] and full wheel covers. Models were further distinguished by the Bel Air name script in gold lettering later in the year.[8] For 1955 Chevrolets gained a V8 engine option and the option of the 2 speed Powerglide automatic, or a standard three speed Synchro-Mesh manual transmission with optional overdrive. The new 265 cu in (4,340 cc) V8 featured a modern, overhead valve high compression, short stroke design that was so good that it remained in production in various displacements for many decades. The base V8 had a two-barrel carburetor and was rated at 162 hp (121 kW), and the "Power Pack" option featured a four-barrel carburetor and other upgrades yielding 180 bhp (130 kW). Later in the year, a "Super Power Pack" option added high-compression and a further 15 bhp (11 kW). "Idiot" lights replaced gauges for the generator and oil pressure.[9]

This was not the first Chevrolet to be installed with a V8 engine. The first Chevrolet with a V8 engine was introduced in 1917 called the Series D which was built for two years, and was manufactured before Chevrolet joined General Motors.

Motor Trend magazine gave the Bel Air top marks for handling.[9] Popular Mechanics reported acceleration for a V8 Bel Air with Powerglide as being 0-60 mph in 12.9 seconds, plus a comfortable ride, and good visibility. On the other hand, the horn ring blocked some of the speedometer, regular gasoline made the engine knock, and the first V8 engines off the line burned too much oil.[10] Front legroom was 43.1".[1] Brakes were 11" drums.[11] A new option for V8-equipped 1955 models was air conditioning, with outlets on each side of the dashboard; a heavy-duty generator was included on cars equipped with this option; in 1955 and 1956, air conditioning could be installed on cars ordered with the standard three-speed manual transmission, overdrive or Powerglide, but from 1957 onward, an automatic transmission (or minus that, 4-speed manual transmission) was a pre-requisite option.

The Century remained Buick's performance line, with engine power rising from 200 (SAE gross) in 1954, to 236 in 1955, to 255 in 1956, and topping out at 300 from a bored-out 364 cu in (6.0 L) engine in 1957-58, the last model years for the full sized Century line.

55' Chevrolet Bel Air (Greenlight Motor World series)

The Chevrolet Bel Air was a full-size automobile that was produced by Chevrolet for the 1950–1981 model years. Initially only the two door hardtops in the Chevrolet model range were designated with the Bel Air name from 1950 to 1952, as distinct from the Styleline and Fleetline models for the remainder of the range. With the 1953 model year the Bel Air name was changed from a designation for a unique body shape to a premium level of trim applied across a number of body styles. The Bel Air continued with various other trim level designations until US production ceased in 1975, production continued in Canada for its home market only through the 1981 model year.

From 1955 to 1957, production of the two-door Nomad station wagon was assigned to the Bel Air series, although its body and trim were unique to that model. Prior to becoming a regular production model, the Nomad first appeared as a Corvette-based concept vehicle in 1954. Chevrolet has since unveiled two concept cars bearing the Nomad name, most recently in 1999. The 1955–1957 Chevrolets are commonly referred to as TriFives.

The 1955-1957s were made in right-hand drive and shipped from Oshawa, Canada, for local assembly in Australia (CKD), New Zealand (SKD), and South Africa. All three model years had a reversed version of the '55 LHD dashboard and did not get the LHD models' 1957 redesign.

Shift Kicker (Hot Wheels Larry Garage)

The model is designed Larry Wood inspired in Rat Cars.

'05 Chevrolet Corvette C6.R (Jada)

The Chevrolet Corvette C6.R is a grand tourer racing car built by Pratt & Miller and General Motors for competition in endurance racing. It is a replacement for the Corvette C5-R racing car, applying the body style of the new C6 generation Chevrolet Corvette as well as improvements to increase the speed and reliability on the track. Since its debut in 2005, it has continued on from the previous dominance of the C5-R in its racing class with multiple American Le Mans Series championships and race wins in the Le Mans Series, FIA GT Championship, and 24 Hours of Le Mans. There are two main versions of the Corvette C6.R: the GT1 version which has 590 HP, carbon ceramic brakes and aggressive aerodynamics, and the GT2 version which has 470 HP, iron brakes and relatively stock aerodynamics with respect to the road car. By 2012 the C6.R GT1 was retired from competition while the GT2 version continues to race around the world.

Model A 1929 "Joe's Speed Shop" Maisto

The Ford Model A (also colloquially called the A-Model Ford or the A, and A-bone among rodders and customizers), was the second huge success for the Ford Motor Company, after its predecessor, the Model T. First produced on October 20, 1927, but not sold until December 2, it replaced the venerable Model T, which had been produced for 18 years. This new Model A (a previous model had used the name in 1903–04) was designated a 1928 model and was available in four standard colors.

By 4 February 1929, one million Model As had been sold, and by 24 July, two million. The range of body styles ran from the Tudor at US$500 (in grey, green, or black) to the Town Car with a dual cowl at US$1200.[4] In March 1930, Model A sales hit three million, and there were nine body styles available.

Model A production ended in March, 1932, after 4,858,644 had been made in all body styles. Its successor was the Model B, which featured an updated 4-cylinder engine, as well as the Model 18, which introduced Ford's new flathead (sidevalve) V8 engine.

'80 Ford Turbo Mustang (Hot Wheels Cool Classics)

The Ford Mustang is an American automobile manufactured by Ford. It was originally based on the platform of the second generation North American Ford Falcon, a compact car. The original 1962 Ford Mustang I two-seater concept car had evolved into the 1963 Mustang II four-seater concept car which Ford used to pretest how the public would take interest in the first production Mustang. The 1963 Mustang II concept car was designed with a variation of the production model's front and rear ends with a roof that was 2.7 inches shorter. Introduced early on April 17, 1964, and thus dubbed as a "1964½" by Mustang fans, the 1965 Mustang was the automaker's most successful launch since the Model A. The Mustang has undergone several transformations to its current sixth generation.

The Mustang created the "pony car" class of American automobiles—sports-car like coupes with long hoods and short rear decks—and gave rise to competitors such as the Chevrolet Camaro, Pontiac Firebird, AMC Javelin, Chrysler's revamped Plymouth Barracuda, and the first generation Dodge Challenger. The Mustang is also credited for inspiring the designs of coupés such as the Toyota Celica and Ford Capri, which were imported to the United States.

The 1979 Mustang was based on the longer Fox platform (initially developed for the 1978 Ford Fairmont and Mercury Zephyr). The interior was engineered to accommodate four people in comfort despite a smaller rear seat. Body styles included a coupé, (notchback), hatchback, and convertible. Available trim levels included L, GL, GLX, LX, GT (1982-1993), GTS, Turbo GT (1983–84), GT-350 (1984), SVO (1984–86), Cobra (1979–81,1993), Cobra R (1993), and Ghia (1979–81).

The third generation Mustang had two different front end styles. From 1979 to 1986 the car had an angled back front clip and four headlights, known by enthusiasts as "Four Eyes." Then in the 1987 to 1993 model years, the front clip had a rounded-off shape known as the "aero" style with flush composite headlamps. Also in 1986, engines featured EFI (electronic fuel injection) instead of carburetors. Other changes for the 1986 models included an upgraded 8.8-inch (224 mm) rear-end with four shock absorbers.

In response to slumping sales and escalating fuel prices during the early 1980s, a new Mustang was in development. It was to be a variant of the Mazda MX-6 assembled at AutoAlliance International in Flat Rock, Michigan. Enthusiasts wrote to Ford objecting to the proposed change to a front-wheel drive, Japanese-designed Mustang without a V8 option. The result was a major facelift of the existing Mustang in 1987, while the MX-6 variant had a last minute name change from Mustang to Probe and released as a 1989 model.

Scania R470 1/32 (Welly)

The Scania G/P/R-Series, formerly Scania 4-series, is a truck model range which was produced by Scania in 1995 as the 1996 model. It was the successor of the 3-series and it came in five engine combinations and four chassis types. Production of Scania 4-series was stopped after its successors P-series, R-series and G-series were starting in 2004.

The engine sizes are - as usual for the 1-4 series - shown in the model name with a number constructed by the cylinder volume in litres followed by the generation of truck. This way a 14-litre engine in the 4-series will be a 144.

The letter, following the number describes the chassis type, but in the 4-series this code changed compared to former series (L, D, C and G in 4-series). The 3-digit number on the opposite corner in the front stands for horse power. This ranged up to 530 bhp, dwarfed by Scania's top of the line truck with 730 bhp.

The 4-series changed the well-known Scania front look from quite square and lined to new round and curved shapes. The new cab design also split the grill horizontally in two, making the lower part flip down to make a step usable for better reach when cleaning windows or eventually as a bench while waiting somewhere.

Volvo FH12 Globetrotter 600 1/32 (Welly)

The Volvo FH is a heavy truck range produced by Swedish Volvo Truck Corporation. Introduced in late 1993 as FH12 and FH16, production still continues with the now the second generation of FH range model lineup. FH stands for Forward control High entry where numbers denominate engine capacity in litres. The FH range is one of the most successful truck series ever having sold more than 400,000 units worldwide.[1]

In 2001 Volvo introduced the third generation of the FH and FM series with the cab and driveline given major makeover.[9] with an investment cost of 600 million euros [10] Major changes included redesign of the cab to improve aerodynamics, the new automatic gearchange transmission, I shift, new electronics system and engine improvements.

The changes to the cab included a new day cab, which is 150 mm longer with redesigned air intake and flat floor. New rear view mirrors were introduced to reduce blind spots and improve air flow, new headlights and front side marker lights, new split sunvisor and new wider front steps complemented the external modifications. The interior was redesigned with more rounded edges around the dashboard and new seats with integrated seatbelts. Integrated telephone speaker and microphone with steering wheel controls for radio and inbuilt GSM phone were an option.

As a standard equipment FH models also included FUPS (Front Underrun Protection System) to further enhance safety by preventing smaller vehicles from being "underrun" or wedged under front of the truck in an event of frontal collision.

'66 Chevy El Camino (auto world)

Chevrolet El Camino is a coupé utility/pickup vehicle that was produced by Chevrolet between 1959–60 and 1964-87.

Introduced in the 1959–1960 model years in response to the success of the Ford Ranchero pickup, its first run lasted only two years. Production resumed for the 1964–1977 model years based on the Chevelle platform, and continued for the 1978–1987 model years based on the GM G-body platform.

Although based on corresponding Chevrolet car lines, the vehicle is classified and titled in North America as a truck. GMC's badge engineered El Camino variant, the Sprint, was introduced for the 1971 model year. Renamed Caballero in 1978, it was also produced through the 1987 model year.

In 1966, GM added a 396 cu in (6.5 L) V8 engine to the lineup rated from 325 to 375 hp (280 kW). The 1965 327 would run low 15s in the 1/4 mile (at some 90 mph), while 1966 to 1969 models were easily into the mid- to upper-14s. New sheetmetal highlighted the 1966 El Camino, identical to the Chevelle. A new instrument panel with horizontal sweep speedometer was featured. Inside, the standard version featured a bench seat interior and rubber floor mat from the low-line Chevelle 300 series, while the Custom used a more upscale interior from the Chevelle Malibu with plusher cloth-and-vinyl or all-vinyl bench seats and deep twist carpeting, or optional Strato swivel bucket seats with console. A tachometer was optional.

'14 Honda Odyssey (Hot Wheels 2016 series)

The Honda Odyssey is a minivan manufactured by Japanese automaker Honda since 1994.

The Odyssey had originally been conceived and engineered in Japan, in the wake of country's economic crisis of the 1990s – which in turn imposed severe constraints on the vehicle's size and overall concept, dictating the minivan's manufacture in an existing facility with minimal modification. The result was a smaller minivan, in the Compact MPV class, that was well received in the Japanese domestic market and less well received in North America. The first generation Odyssey was marketed in Europe as the Shuttle.

Subsequent generations diverged to reflect market variations, and Honda built a plant in Lincoln, Alabama, incorporating the ability to manufacture larger models. Since model year 1999, Honda has marketed a larger (large MPV-class) Odyssey in North America and a smaller Odyssey in Japan and other markets. Honda also offered the larger North American Odyssey in Japan as Honda LaGreat between 1999 and 2005. Both versions of the Odyssey were sold in Japan at Honda Clio dealership locations.

The North American fourth generation Odyssey was officially released on sale on September 30, 2010 for the 2011 model year.

Honda presented the 2011 Odyssey Concept in early 2010 at the Chicago Auto Show and officially on June 17; with a larger, wider body, a lower roofline and revised styling.

The redesigned Odyssey features options including 12-speaker 650 watt audio system (Touring Elite), a voice-controlled satellite GPS and DVD navigation system with XM NavTraffic (Touring and above, available EX-L), an external HDMI input (Touring Elite), a larger 16.2-inch (410 mm) split-screen rear-seat DVD entertainment system (Touring Elite), a "cool box" chilled by the air conditioning (EX-L and above), a stowable 3rd row 60/40 split bench seat, a removable first row center console (EX and above), and a new steering wheel via updates.

The 2011 Odyssey includes projector headlamps or HID xenon low-beam headlamps (Touring Elite), standard 17-inch wheels, 18-inch alloy wheels (Touring and above), and 6-speed automatic transmission (Touring and above). All trims come standard with a backup camera, with higher trims offer a tri-angle rearview camera. The body is constructed using 59% high strength steel, ranging from 390-1,500 MPa yield strength.
Mid-generational refresh

For the 2014 model year, Honda facelifted the Odyssey. This includes a 6-speed automatic transmission on all trims, sleeker exterior styling with a new aluminum hood, aluminum front fenders, twin-bar grille and revised lower front fascia with integrated fog lights, darker-finish projector headlight housings, Smart entry availability and LED rear taillight bars. A built-in vacuum cleaner system is included with the Touring Elite model.

Honda's i-MID, also available on the Civic and Accord, is also standard for 2014, all models get standard Pandora Internet Radio capabilities, Bluetooth Hands-Free Link, iPod, iPhone, and USB integration, a 3.5 millimeter auxiliary input jack, and a color display screen.


The models for 2014 include the LX, the EX, the EX w/ Leather (EX-L), the Touring, and the Touring Elite; the SE trim, which is positioned between LX and EX, is available for the Canadian market . New exterior paint colors are available for 2014, as are new interior fabrics and trim pieces.

Photos of the hotweels.com, enjoy!

1955 Cadillac Fleetwood "Elvis Presley" Series 60 "Pink Cadillac" (GreenLight) 1/18

The Cadillac Sixty Special name has been used by Cadillac to denote a special model since the 1938 Harley Earl-Bill Mitchell-designed Series 60 derivative. The Sixty Special name would soon be synonymous for some of Cadillac's most luxurious vehicles. This exclusivity was reflected in the introduction of the exclusive Sixty Special Fleetwood Brougham d'Elegance in 1973, and the Sixty Special Fleetwood Brougham Talisman in 1974.

Sixty Special arrived with revised trim and more power (250 hp (190 kW), to be exact) for 1955, and while the $4,342 price was lower than last year, production rose slightly to 18,300 units. The eight chrome louvers – mounted on the lower rear doors since 1950, were replaced by 12 louvers mounted just ahead of the bumper on the rear fenders. Chrome rocker panel moldings – taller than the ones used on Series 62s - stretched from the back of the rear wheel well to the rear bumper. A new grille held a bold eggcrate design, while the rear roof support fashioned a delicate Florentine curve – this design was also shared with the lower-rung Series 62. In back, six vertical chrome louvers were mounted on the panel below the trunk lid – three spaced on each side of the license plate mounting. The tinted band across the windshield header changed from green to gray this year. A new option, the remote control trunk release, debuted this year.

'65 Ford Econoline Van - Custom (M2 Machines)

The Ford E-Series, also known as the Ford Econoline in Mexico and Ford Club Wagon, is a line of full-size vans (both cargo and passenger) and truck chassis from the Ford Motor Company. The line was introduced in 1961 as a compact van and produced through four generations. The E-series is available in 2015 only as a stripped chassis and cutaway. Other versions have been replaced by the Ford Transit.

The E-Series has been a separate platform since 1968, it uses many components from the F-Series line of pickup trucks. The Econoline is manufactured at Ford's Ohio Assembly plant in Avon Lake, Ohio following the closure of the Lorain Assembly plant in December 2005.

Since 1980, E-Series has been the best selling American full-sized van, and held 79.6% of the full-size van market in the United States in 2007, with 168,722 vehicles sold.

The E-series was available with a GCWR (Gross Combined Weight Rating) of up to 20,000 lb (9,072 kg) making it a base for recreational vehicles and for towing trailers.

Ninety-five percent of van sales are to commercial or fleet-end users; about half are cargo vans. The E-Series cargo area featured a double-wall design that made the exterior sheet metal less vulnerable to damage from shifting cargo.

In early 2007, the E-Series was listed by Autodata as one of the top 20 best-selling vehicles in the United States, most likely due to fleet sales. In China, the Ford E-Series (E250 and E350) are manufactured by Jiangling Motors with Ford name plates. As of 2014, the Ford E-Series was marketed in North America, the Middle East, and China in LHD only. It has been discontinued in Mexico.

Based on the compact Ford Falcon, the first Ford Econoline was introduced for the 1961 model year. Sized roughly to compete with the Chevrolet Corvair 95 (Greenbrier Sportswagon) and Volkswagen Type 2, which was 172.3 in (4,376 mm) long. It was originally offered as a cargo van, an eight-passenger van with three rows of seats (which carried the Ford Falcon name) and as a pickup truck. A 165 lb (75 kg) counterweight was fitted over the rear wheels to balance the front-heavy vehicle; this was sometimes removed by later owners. The implementation of situating the driver on top of the front axle with the engine near the front wheels is called, in the US, a "cab over" short for cab over engine configuration. In Europe it is called a "forward control" vehicle. The body styling borrowed heavily from the, smaller, UK produced, Thames 400E which had been in production since 1957 and the 1956-64 Jeep Forward Control.

Instead of the rear-mounted engine used by Volkswagen and Chevrolet, the first E-Series had a flat nose with the engine between and behind the front seats. Early models had a 144 CID inline 6-cylinder engine with a three-speed manual transmission. Later models had 170 CID or 240 CID engines with a three-speed manual or automatic transmission. It was an immediate success with utilities like the Bell Telephone System.

In its first year, 29,932 standard vans, 6,571 custom Econoline buses, 11,893 standard pickups and 3,000 custom pickups were made. The success of the Econoline led to its layout adopted in 1964 by the Chevrolet Van/GMC Handi-Van and Dodge A100; it would also be utilized internationally and sold by Mitsubishi, Nissan, and Toyota, with microvans called the Subaru Sambar and the Daihatsu Hijet.

Mercury Econoline
In rural Canada, where automobile dealers were scarce, the Econoline was sold as a Mercury alongside the M-Series truck lineup. Only the first generation of Econolines were sold as Mercurys; the next van sold by the division would be the 1993 Villager minivan.