Mostrando postagens com marcador '70. Mostrar todas as postagens
Mostrando postagens com marcador '70. Mostrar todas as postagens

quinta-feira, 31 de dezembro de 2015

'70 Ford Escort RS1600 Fast & Furious (Hot Wheels 2015 Series)


The Ford Escort is a small family car that was manufactured by Ford Europe from 1968 to 2004. The Ford Escort name was also applied to several different small cars produced in North America by Ford between 1981 and 2003. In 2014, Ford revived the Escort name for a car based on the second-generation Ford Focus sold on the Chinese market.

The Mark I Ford Escort was introduced in the United Kingdom at the end of 1967, making its show debut at Brussels Motor Show in January 1968. It replaced the successful long running Anglia. The car was presented in continental Europe as a product of Ford's European operation. Escort production commenced at Halewood in England during the closing months of 1967, and for left hand drive markets during September 1968 at the Ford plant in Genk. Initially the continental Escorts differed slightly from the UK built ones under the skin. The front suspension and steering gear were differently configured and the brakes were fitted with dual hydraulic circuits; also the wheels fitted on the Genk-built Escorts had wider rims. At the beginning of 1970, continental European production transferred to a new plant on the edge of Saarlouis, West Germany.

The Escort was a commercial success in several parts of western Europe, but nowhere more than in the UK, where the national best seller of the 1960s, BMC's Austin/Morris 1100 was beginning to show its age while Ford's own Cortina had grown, both in dimensions and in price, beyond the market niche at which it had originally been pitched. In June 1974, six years into the car's UK introduction, Ford announced the completion of the two millionth Ford Escort, a milestone hitherto unmatched by any Ford model outside the US. It was also stated that 60% of the two million Escorts had been built in Britain. In West Germany cars were built at a slower rate of around 150,000 cars per year, slumping to 78,604 in 1974 which was the last year for the Escort Mark I. Many of the German built Escorts were exported, notably to Benelux and Italy; from the West German domestic market perspective the car was cramped and uncomfortable when compared with the well-established and comparably priced Opel Kadett, and it was technically primitive when set against the successful imported Fiat 128 and Renault 12. Subsequent generations of the Escort made up some of the ground foregone by the original model, but in Europe's largest auto-market the Escort sales volumes always came in well behind those of the General Motors Kadett and its Astra successor.


Just over two months after the launch of the saloon/sedan, Ford announced a three-door station wagon / estate version of their new Escort.
The Escort had conventional rear-wheel drive and a four-speed manual gearbox, or three-speed automatic transmission. The suspension consisted of MacPherson strut front suspension and a simple live axle mounted on leaf springs. The Escort was the first small Ford to use rack-and-pinion steering. The Mark I featured contemporary styling cues in tune with its time: a subtle Detroit-inspired "Coke bottle" waistline and the "dogbone" shaped front grille – arguably the car's main stylistic feature. Similar Coke bottle styling featured in the larger Cortina Mark III (also built in West Germany as the Taunus) launched in 1970.


Less than two years after launch, Ford offered a four-door version of the Escort.
Initially, the Escort was sold as a two-door saloon (with circular front headlights and rubber flooring on the "De Luxe" model). The "Super" model featured rectangular headlights, carpets, a cigar lighter and a water temperature gauge. A two-door estate was introduced at the end of March 1968 which, with the back seat folded down, provided a 40% increase in maximum load space over the old Anglia 105E estate, according to the manufacturer. The estate featured the same engine options as the saloon, but it also included a larger, 7 1⁄2-inch-diameter (190 mm) clutch, stiffer rear springs and in most configurations slightly larger brake drums or discs than the saloon. A panel van appeared in April 1968 and the 4-door saloon (a bodystyle the Anglia was never available in for UK market) in 1969.

Underneath the bonnet was the Kent Crossflow engine also used in the smallest capacity North American Ford Pinto. Diesel engines on small family cars were rare, and the Escort was no exception, initially featuring only petrol engines – in 1.1 L, and 1.3 L versions. A 940 cc engine was also available in some export markets, but few were ever sold.


There was a 1300GT performance version, with a tuned 1.3 L Crossflow (OHV) engine with a Weber carburetor and uprated suspension. This version featured additional instrumentation with a tachometer, battery charge indicator, and oil pressure gauge. The same tuned 1.3 L engine was also used in a variation sold as the Escort Sport, that used the flared front wings from the AVO range of cars, but featured trim from the more basic models. Later, an "executive" version of the Escort was produced known as the "1300E". This featured the same 13" road wheels and flared wings of the Sport, but was trimmed in an upmarket, for that time, fashion with wood trim on the dashboard and door cappings.

A higher performance version for rallies and racing was available, the Escort Twin Cam, built for Group 2 international rallying. It had an engine with a Lotus-made eight-valve twin camshaft head fitted to the 1.5 L non-crossflow block, which had a bigger bore than usual to give a capacity of 1,557 cc. This engine had originally been developed for the Lotus Elan. Production of the Twin Cam, which was originally produced at Halewood, was phased out as the Cosworth-engined RS1600 (RS denoting Rallye Sport) production began. The most famous edition of the Twin Cam was raced on behalf of Ford by Alan Mann Racing in the British Saloon Car Championship in 1968 and 1969, sporting a full Formula 2 Ford FVC 16-valve engine producing over 200 hp. The Escort, driven by Australian driver Frank Gardner went on to comfortably win the 1968 championship.

The Mark I Escorts became successful as a rally car, and they eventually went on to become one of the most successful rally cars of all time. The Ford works team was practically unbeatable in the late 1960s / early 1970s, and arguably the Escort's greatest victory was in the 1970 London to Mexico World Cup Rally, co-driven by Finnish legend Hannu Mikkola and Swedish co-driver Gunnar Palm. This gave rise to the Escort Mexico (1.6 L "crossflow"-engined) special edition road versions in honour of the rally car.

In addition to the Mexico, the RS1600 was developed with 1,601 cc Cosworth BDA which used a Crossflow block with a 16-valve Cosworth cylinder head, named for "Belt Drive A Series". Both the Mexico and RS1600 were built at Ford's Advanced Vehicle Operations (AVO) facility located at the Aveley Plant in South Essex. As well as higher performance engines and sports suspension, these models featured strengthened bodyshells utilising seam welding in places of spot welding, making them more suitable for competition.

After updating the factory team cars with a larger 1701 cc Cosworth BDB engine in 1972 and then with fuel injected BDC, Ford also produced an RS2000 model as an alternative to the somewhat temperamental RS1600, featuring a 2.0 L Pinto (OHC) engine. This also clocked up some rally and racing victories; and pre-empted the hot hatch market as a desirable but affordable performance road car. Like the Mexico and RS1600, this car was produced at the Aveley plant.

The Escort was built in Germany and Britain, as well as in Australia and New Zealand.

segunda-feira, 16 de novembro de 2015

'70 Plymouth Superbird Hot Wheels (Real Riders series)



The short-lived Plymouth Road Runner Superbird was a highly modified version of the Plymouth Road Runner with well-known graphics and horn. It was the factory's follow up stock car racing design for the 1970 season to the Dodge Charger Daytona of 1969, and incorporated many engineering changes and modifications (both minor and major) garnered from the Daytona's season in competition on the track.

The car's primary rival was the Ford Torino Talladega, which in itself was a direct response to the Mopar aero car. It has also been speculated one motivating factor in the production of the car was to lure Richard Petty back to Plymouth. Both of the Mopar aero cars famously featured a protruding, aerodynamic nosecone, a high-mounted rear wing and, in the case of the Superbird, a horn which mimicked the Road Runner cartoon character.

Superbirds equipped with the top of the line 426 cu in (7.0 L) Hemi engine with a pair of four barrel Carter AFB carburettors (2x4bbl) producing 425 hp (317 kW) could accelerate from 0 to 60 mph (97 km/h) in 5.5 seconds.
Developed specifically for NASCAR racing, the Superbird, a modified Road Runner, was Plymouth's follow-on design to the Charger Daytona fielded by sister company Dodge in the previous season. The Charger 500 version that began the 1969 season was the first American car to be designed aerodynamically using a wind tunnel and computer analysis, and later was modified into the Daytona version with nose and tail. The Superbird's smoothed-out body and nosecone were further refined from that of the Daytona, and the street version's retractable headlights (made of fiberglass) added nineteen inches to the Road Runner's original length. The rear wing was mounted on tall vertical struts that put it into less disturbed air thus increasing the efficiency of the downdraft that it placed upon the car's rear axle. For nearly 30 years the mathematic formula used to determine the exact height of the enormous wing was thought to be a highly guarded Chrysler secret. However, in the 1990s a retired Chrysler project engineer admitted publicly that the height was determined in much simpler fashion: it was designed to provide clearance for the trunklid to open freely. It should be noted that by a co-incidence the height of the wing was at the optimum level for maximum downforce. The rear-facing fender scoops were to hide cut outs. These cutouts were to allow wheel clearance due to the larger, wider wheels and lowered height of the vehicle for NASCAR. On Daytonas, the scoops were actually for ventilating trapped air from the wheel wells in order to reduce under fender air pressure and lift. For standard road going Superbirds the covers or "air extractors" were a cosmetic enhancement, for looks only. Ground clearance was 7.2 inches (18 centimetres).
Plymouth Roadrunner Superbird decal.

quinta-feira, 24 de setembro de 2015

'70 Plymouth Superbird (Hot Wheels 2015 series with riders error)



The short-lived Plymouth Road Runner Superbird was a highly modified version of the Plymouth Road Runner with well-known graphics and horn. It was the factory's follow up stock car racing design for the 1970 season to the Dodge Charger Daytona of 1969, and incorporated many engineering changes and modifications (both minor and major) garnered from the Daytona's season in competition on the track.[6]

The car's primary rival was the Ford Torino Talladega, which in itself was a direct response to the Mopar aero car. It has also been speculated one motivating factor in the production of the car was to lure Richard Petty back to Plymouth.[7] Both of the Mopar aero cars famously featured a protruding, aerodynamic nosecone, a high-mounted rear wing and, in the case of the Superbird, a horn which mimicked the Road Runner cartoon character.[8]

Superbirds equipped with the top of the line 426 cu in (7.0 L) Hemi engine with a pair of four barrel Carter AFB carburettors (2x4bbl) producing 425 hp (317 kW) could accelerate from 0 to 60 mph (97 km/h) in 5.5 seconds.

sábado, 13 de dezembro de 2014

'70 Chevelle SS (Hot Wheels 2014 series)



The Chevrolet Chevelle was a mid-sized automobile produced by the Chevrolet division of General Motors in three generations for the 1964 through 1977 model years. Part of the GM A-Body platform, the Chevelle was one of Chevrolet's most successful nameplates. Body styles include coupes, sedans, convertibles and station wagons. Super Sport versions were produced through the 1973 model year, and Lagunas from 1973 through 1976. After a three-year absence, the El Camino was reintroduced as part of the new Chevelle lineup. The Chevelle also provided the platform for the Monte Carlo introduced in 1970. The Malibu, the top of the line model through 1972, replaced the Chevelle nameplate for the redesigned, downsized 1978 models.
In 1970, sheetmetal revisions gave the bodies a more squared-up stance and interiors were redesigned, too. The 1970 Chevelle came in sport coupe, sport sedan, convertible, four-door sedan, a couple of wagons, and coupé utility (the El Camino) body styles. Only 3 of these (Malibu sport coupe, Malibu convertible and El Camino pickup) were available with a choice of one of 2 SS options; RPO Z25 with the SS 396 (402 cid) engine and RPO Z15 with the new 454 cid engine. The SS options were limited to the Malibu two-door sport coupe, Malibu convertible and El Camino pickup. The base model Chevelle was now named Chevelle (which causes confusion) in lieu of the former base 300 Deluxe and was only as a sport coupe or four-door sedan.
The SS 396 Chevelle included a 350 horsepower (260 kW) Turbo-Jet 396 V8, special suspension, "power dome" hood, black-accented grille, resilient rear-bumper insert, and wide-oval tires on sport wheels. Though a 375 horsepower (280 kW) cowl induction version was available, few were sold in favor of the newly introduced 454 engine in the October/November 1969 timeframe. The LS5 454-cubic-inch V8 produced 360 horsepower (270 kW) in standard form and a cowl induction version was also available. The LS6 produced a claimed 450 gross HP in solid-lifter, high-compression guise. It has been suggested that the LS6 was substantially "under-rated" and actually produced something on the order of 500 horsepower (370 kW) as delivered from the factory. Recent engine dyno tests have proven that the 1970 LS-6 engine makes over 450 hp and 500 lb/ft torque in stock configuration (stock compression ratio, stock camshaft, stock intake and exhaust manifolds). Super Chevy Magazine conducted a chassis dyno test of a supposed production-line stock 1970 Chevelle and recorded 282 peak HP at the wheels. This test that was not done under SAE standards. The engine was said to be correct but is not confirmed.[12] Current 1/4 mile times and MPH of a 1970 Chevelle equipped with 100% factory stock LS-6 engines and modern tires are turning very low 12 second times (13.07) with trap speeds of 112+ mph.

Photos of the minisinfoco or lamleygroup, best sites of the diecast, enjoy!

segunda-feira, 10 de novembro de 2014

'70 Datsun 240Z (Hot Wheels 2011 series)

'70 Datsun 240Z (Hot Wheels 2011 series)


The 1970 240Z was introduced to the American market by Yutaka Katayama, president of Nissan Motors USA operations, widely known as Mr. K. The 1970 through the mid-1971 model year 240Z was referred to as the Series I. These early cars had many subtle but notable features differing from later cars. The most easily visible difference is that these early cars had a chrome "240Z" badge on the sail pillar, and two horizontal vents in the rear hatch below the glass molding providing flow through ventilation. In mid-1971, for the Series II 240Z-cars, the sail pillar emblems were restyled with just the letter "Z" placed in a circular vented emblem, and the vents were eliminated from the hatch panel of the car. Design changes for the U.S. model 240Z occurred throughout production, including interior modifications for the 1972 model year, and a change in the location of the bumper over-riders, as well as the addition of some emission control devices and the adoption of a new style of emissions reducing carburetors for the 1973 model year.
In Japan, it was exclusive to Nissan Japanese dealerships called Nissan Bluebird Store, and was first introduced in Japan in 1969.
The 1970 models were introduced in October 1969, received the L24 2.4-liter engine with a manual choke and a 4-speed manual. A less common 3-speed automatic transmission was optional from 1971 on, and had a "Nissan Full Automatic" badge.
In 1973, the 240Z, in the hands of Shekhar Mehta, won the 21st East African Safari Rally.
In 2004, Sports Car International named this car number two on the list of Top Sports Cars of the 1970s.
Specifications
Engine: 2,393 cc (146.0 cu in) L24 I-6, cast-iron block, alloy head, two valves per cylinder, seven-bearing crankshaft, single overhead cam, 9.0:1 compression; Maximum recommended engine speed 7000 rpm.
Bore: 83.0 mm (3.27 in)
Stroke: 73.7 mm (2.90 in)
Fuel system: Mechanical fuel pump, twin Hitachi HJG 46W 1.75 in (44 mm) SU-type carburetors
Power: 151 hp (113 kW) at 5600 rpm (SAE gross)
Torque: 146 lbf·ft (198 N·m) at 4400 rpm (SAE gross)
Transmission: Four-speed manual, five-speed manual, or three-speed automatic (after September 1970)
Final drive ratios:
Four-speed manual transmission: 3.364:1 (37:11)
Five-speed manual transmission: 3.90:1 (39:10) (not available in US)
Three-speed automatic transmission: 3.545:1 (39:11).
Brakes:
Front: 10.7 in (270 mm) discs
Rear: 9.0 in (230 mm) x 1.6 in (41 mm) drums
Suspension:
Front: Independent with MacPherson struts, lower transverse and drag links, coil springs, telescopic dampers, anti-roll bar
Rear: Independent with Chapman struts, lower wishbones, coil springs, telescopic dampers
Steering: Rack and pinion, 2.7 turns lock to lock
Wheels: 4.5J-14 steel wheels with 175SR14 tires
Top speed: 125 mph (201 km/h)
0 to 60 mph (97 km/h): 8.0 s
Typical fuel consumption: 21 mpg-US (11 L/100 km; 25 mpg-imp)
Japan models went on sale in limited quantities (10 units), which included Kinetic Blue Metallic body colour, black 20-inch wheels, HOT WHEELS decal stripe, exclusive rear spoiler, front leather seats with HOT WHEELS embroidering, engine cover in black, premium floor mat, LFX V-6 engine.

Photos of the minisinfoco or lamleygroup, best sites of the diecast, enjoy!