'69 Dodge Charger Daytona (Hot Wheels 2016 series)

Dodge, an American automobile brand, has produced three separate vehicles with the name Dodge Charger Daytona, all of which were modified Dodge Chargers. The name is taken from Daytona Beach, Florida, which was an early center for auto racing and still hosts the Daytona 500, one of NASCAR's premier events. The first use of the Daytona name on a car was on a version of the Studebaker Lark. The Daytona was the performance model of the compact Lark and it was produced from 1963–1966.This vehicle has also starred in the BlockBuster action film, Fast and Furious 6.

With the failure of the 1969 Dodge Charger 500 on the highbanks of the superspeedways (tracks of a mile, or more in length), the 1969 Dodge Charger Daytona was created. It was intended to be a high-performance, limited-edition version of the Dodge Charger produced in the summer of 1969 for the sole purpose of winning high profile NASCAR races. It won its first race out, the inaugural Talladega 500 in the fall, although it was a rather hollow victory as all of the top names had left the track on Saturday in a boycott of the 1969 Talladega race. Buddy Baker in the #88 Chrysler Engineering Dodge Charger Daytona was the first driver in NASCAR history to break the 200  mph mark on March 24, 1970 at Talladega. The 1969 Dodge Daytona won two races in 1969 and another four in 1970 for a total of 6. Its successor, the 1970 Plymouth Superbird, won 8 races - all in 1970. (In a bit of irony, in 1969 a Daytona won at Talladega, and a Ford Torino Talladega won at Daytona.) These compare with 29 NASCAR victories for the 1969 Ford Torino Talladega, and 8 for the 1969 Mercury Cyclone Spoiler II. The 1969 Dodge Charger 500 managed to win 22 NASCAR races over the 1969 and 1970 seasons; however, all but one of those victories came on the short tracks - several of which were still being run on dirt at the time.

One of the four famous aero-cars, the Dodge Daytona featured special body modifications that included a 23-inch-tall (584 mm) stabilizer wing on the rear deck, a special sheet-metal "nose cone" that replaced the traditional upright front grille, a flush rear backlight (rear window area), a 'window cap' to cover the original Charger's recessed rear window, specific front fenders and hood that were modeled after the upcoming 1970 Charger, stainless steel A-pillar covers and fender mounted tire clearance/brake cooling scoops. The Daytona was built on the 1969 Charger's R/T trim specifications, meaning that it carried a heavy-duty suspension and brake setup and was equipped with a 440 CID Magnum engine as standard. Of special note to collectors is the optional 426 CID Hemi V8 engine, which only 70 of the 503 Daytonas carried. It had a corporate cousin in the "one year-only" 1970 Plymouth Superbird.


Re-creation of record-breaking #88 NASCAR Charger Daytona at the 1998 Goodwood Festival of Speed
The "Winged Warriors", as they were affectionately known, did not compete for long in NASCAR's top Cup series. Because of their exceptional speed and performance, NASCAR subsequently changed the rule book, effectively banning all five of the Aero Cars from Dodge, Ford, Mercury, and Plymouth from competition by the end of 1970. See also Plymouth Superbird, Ford Torino Talladega and Mercury Cyclone Spoiler II for additional information about the aero cars.

The Dodge Daytona is now a very rare and valuable collectible, with 440-powered Daytonas reaching into six-figure territory and 426 hemi-engined cars passing the $300,000 mark. The "Super Charger IV EL", which looked like a roadster prototype spin-off of the Charger Daytona minus the roof and spoiler, is seen as a pimp-mobile in the 1974 film Truck Turner. Actually, it was just an older Charger show car updated with a SuperBird nose.

A car resembling the Daytona appeared in Universal Studio's 2013 action movie Fast & Furious 6. According to the story line of the film it was an ultra-expensive original Hemi Daytona that had been modified into a pro touring super car. It was driven aggressively by the character Domenic Toretto played by Vin Diesel. In truth, the vehicles used in filming were actually regular 1968 to 1970 chargers with nose pieces and spoilers welded on. They used Chevrolet Racing crate motors and Brembo racing brakes to create a versatile stunt car. Ultimately the car gets destroyed at the end of the film.

Porsche 993 GT2 Super T-Hunt (Hot Wheels 2016 series)

993 is the company's internal name for the version of the Porsche 911 model manufactured and sold between late 1993 and early 1998 (model years 1995-1998 in the United States), replacing the 964. Its discontinuation marked the end of air-cooled Porsches, with the 993 being not just the last air-cooled 911, but also the last of the hand built 911s.[2] The 993 generation of the 911 is often referred to as the best and most desirable of the 911 series, not only because of its beauty, but also because its performance is very good, even by modern standards, and the 993 was "the last complete 'modern classic'"; "the 993 was and forever will be that last fresh breath of air that Porsche gave the world; elegance and muscle all in one package."[3]

The 993 was much improved over, and quite different from, its predecessor. Porsche said that every part of its engine was new,[4] and only 20% of its parts were carried over from the previous generation.[5] Porsche's engineers devised a new light-alloy subframe with coil and wishbone suspension (an all new multi-link system), putting behind the previous lift-off oversteer[4] and making significant progress with the engine and handling, creating a more civilized car with better than ever quality yet one in which the driving experienced remained uncompromised.[5] The 993 was also the first 911 to receive a six speed gearbox.[6]

Like previous and future generations of the Porsche 911, there were several variants of the car manufactured, varying in body style, engines, drivetrains and included equipment. Whereas the Porsche 964 produced 247 horsepower,[7] the model year 1995 993 produced 272, and this was increased again in the model year 1996-1998 911s with the addition of the Varioram system, which added additional power, particularly in the mid-ranges, and also resulted in a more throaty noise at higher revs; as a consequence, the 1996-1998 Varioram 993s put out 285 horsepower.[8] This resulted in a 15% increase in horsepower over its 964 predecessor.

The 993 was replaced by the Porsche 996. This represented a dramatic change for Porsche. As many enthusiasts agree, "the 993 is one of the sweetest spots in the 911's half-century of existence," and while "more modern versions might be more dynamically capable, they're bloated behemoths in comparison to the lean 993."[9]

The external design of the Porsche 993, penned by Englishman Toni Hatter, retained the basic bodyshell architecture of the 964 and other earlier 911 models, but with revised external panels, with much more flared wheelarches and a smoother front and rear bumper design, an enlarged retractable rear wing, teardrop mirrors, but keeping the doors and roof panels.

Ferrari F430 Scuderia (hot Wheels T-hunt 2012)

The Ferrari F430 is a sports car that was produced by the Italian automaker Ferrari from 2004 to 2009. A successor to the Ferrari 360, it debuted at the 2004 Paris Motor Show. Its replacement, the Ferrari 458, was unveiled on 28 July 2009.

The model scuderia Serving as the successor to the Challenge Stradale, the 430 Scuderia (scuderia meaning "stable of horses", but also used in the context of motor racing teams, including Ferrari's own) was unveiled by Michael Schumacher at the 2007 Frankfurt Auto Show. Aimed to compete with cars like the Porsche RS-models and the Lamborghini Gallardo Superleggera (superleggera meaning super light weight), it is lighter (by 100 kg/220 lb) and more powerful (510 PS (375 kW; 503 hp) at 8500 rpm) than the standard F430. Increased power comes from a revised intake, exhaust, and an ion-sensing knock-detection system that allows for a higher compression ratio. Thus the weight-to-power ratio is reduced from 2.96 kg/hp to 2.5 kg/hp. In addition to the weight saving measures, the Scuderia semi-automatic transmission gained improved "Superfast", known as "Superfast2", software for faster 60 millisecond shift-times. A new traction control system combined the F1-Trac traction and stability control with the E-Diff electronic differential. The Ferrari 430 Scuderia accelerates from 0-100 kilometres per hour (62 mph) in 3.6 seconds, with a top speed of 202 miles per hour (325 km/h). Ferrari claims that around their test track, Fiorano Circuit, it matches the Ferrari Enzo, and the Ferrari F430's successor, the Ferrari 458.

'69 Chevy Corvette (Hot Wheels T-hunt 2012)

The Chevrolet Corvette is a sports car manufactured by the Chevrolet division of American automotive conglomerate General Motors (GM). The car has been produced through seven generations. The first model, a convertible, was designed by Harley Earl and introduced at the GM Motorama in 1953 as a concept show car. Myron Scott is credited for naming the car after the type of small, maneuverable warship called a corvette. Originally built in Flint, Michigan and St. Louis, Missouri, the Corvette is currently manufactured in Bowling Green, Kentucky and is the official sports car of the Commonwealth of Kentucky.

A Corvette has been used as the Indianapolis 500 pace car 12 times.

The third generation Corvette, patterned after the Mako Shark II concept car, was introduced for the 1968 model year and was in production until 1982. C3 coupes featured the first use of T-top removable roof panels. It introduced monikers that were later revived, such as LT-1, ZR-1, and Collector Edition. In 1978, the Corvette's 25th anniversary was celebrated with a two-tone Silver Anniversary Edition and an Indy Pace Car replica edition of the C3. This was also the first time that a Corvette was used as a Pace Car for the Indianapolis 500.

Engines and chassis components were mostly carried over from the C2, but the body and interior were new. The 350 cu in (5.7 L) engine replaced the old 327 cu in (5.36 L) as the base engine in 1969, but power remained at 300 bhp (224 kW). 1969 was the only year for a C3 to optionally offer either a factory installed side exhaust or normal rear exit with chrome tips. The all-aluminum ZL1 engine was also new for 1969; the special big-block engine was listed at 430-hp (320 kW), but was reported to produce 560 hp (420 kW) and propelled a ZL1 through the 1/4 mile in 10.89 seconds.

There was an extended production run for the 1969 model year due a lengthy labor strike, which meant sales were down on the 1970 models, to 17,316. 1970 small-block power peaked with the optional high compression, high-revving LT-1 that produced 370 bhp (276 kW). The 427 big-block was enlarged to 454 cu in (7.44 L) with a 390 bhp (291 kW) rating. The ZR-1 special package was an option available on the 1970 through 1972 model years, and included the LT-1 engine combined with special racing equipment. Only 53 ZR-1's were built.


1973 Corvette Stingray Coupe
In 1971, to accommodate regular low-lead fuel with lower anti-knock properties, the engine compression ratios were lowered which resulted in reduced power ratings. The power rating for the 350 cu in (5.7 L) L48 base engine decreased from 300 to 270 horsepower and the optional special high performance LT1 engine decreased from 370 to 330 horsepower. The big-block LS6 454 was reduced from 450 to 425 bhp (317 kW), though it was not used in Corvettes for 1970; it was used in the Chevelle SS. For the 1972 model year, GM moved to the SAE Net measurement which resulted in further reduced, but more realistic, power ratings than the previous SAE Gross standard. Although the 1972 model's 350 cu in (5.7 L) horsepower was actually the same as that for the 1971 model year, the lower net horsepower numbers were used instead of gross horsepower. The L48 base engine was now rated at 200 bhp (150 kW) and the optional LT1 engine was now rated at 270 bhp (200 kW). 1974 models had the last true dual exhaust system that was dropped on the 1975 models with the introduction of catalytic converters requiring the use of no-lead fuel. Engine power decreased with the base ZQ3 engine producing 165 bhp (123 kW), the optional L82's output 205 bhp (153 kW), while the 454 big-block engine was discontinued. Gradual power increases after 1975 peaked with the 1980 model's optional L82 producing 230 bhp (172 kW).

Styling changed subtly throughout the generation until 1978 for the car's 25th anniversary. The Sting Ray nameplate was not used on the 1968 model, but Chevrolet still referred to the Corvette as a Sting Ray; however, the 1969 (through 1976) models used the "Stingray" name as one word, without the space. In 1970, the body design was updated including fender flares, and interiors were refined, which included redesigned seats,and indication lights near the gear shift that were an early use of fiber optics . Due to government regulation, the 1973 Corvette's chrome front bumper was changed to a 5-mile-per-hour (8 km/h)system with a urethane bumper cover. 1973 Corvettes are unique in that sense, as they are the only year where the front bumper was polyurethane and the rear retained the chrome two-piece bumper set. 1973 was also the last year chrome bumpers were used. The optional wire-spoked wheel covers (left) were offered for the last time in 1973. From 1974 onwards both the front and rear bumpers were polyurethane.


1974 Corvette Stingray Coupe
In 1974, a 5-mile-per-hour (8 km/h) rear bumper system with a two-piece, tapering urethane bumper cover replaced the Kamm-tail and chrome bumper blades, and matched the new front design from the previous year. 1975 was the last year for the convertible, (which did not return for 11 years) and Dave McLellan succeeded Zora Arkus-Duntov as the Corvette's Chief Engineer. For the 1976 models the fiberglass floor was replaced with steel panels to provide protection from the catalytic converter's high operating temperature. Stingray 15 model years where the names Corvette, Sting Ray, and Stingray were synonymous. 1977 was last year the tunneled roof treatment with vertical back window was used, in addition leather seats were available at no additional cost for the first time. The black exterior color returned after a six-year absence.


1978 Chevrolet Corvette
The 1978 25th Anniversary model introduced the fastback glass rear window and featured a new interior and dashboard. Corvette's 25th anniversary was celebrated with the Indy 500 Pace Car limited edition and a Silver Anniversary model featuring silver over gray lower body paint. All 1979 models featured the previous year's pace car seats and offered the front and rear spoilers as optional equipment. 53,807 were produced for the model year, making 1979 the peak production year for all versions of the Corvette. Sales have trended downward since then. In 1980, the Corvette received an integrated aerodynamic redesign that resulted in a significant reduction in drag. After several years of weight increases, 1980 Corvettes were lighter as engineers trimmed both body and chassis weight. In mid-1981, production shifted from St. Louis, Missouri to Bowling Green, Kentucky, and several two-tone paint options were offered. The 1981 models were the last available with a manual transmission until well into the 1984 production run. In 1982, a fuel-injected engine returned, and a final C3 tribute Collectors Edition featured an exclusive, opening rear window hatch.

'64 Pontiac GTO (Hot Wheels 2011 series)

The Pontiac GTO is an automobile that was built by the Pontiac division of General Motors from 1964 to 1974, and by the GM subsidiary Holden in Australia from 2004 to 2006.

The first generation GTO was a muscle car of the 1960s and 1970s era. Although there were earlier muscle cars, the Pontiac GTO is considered by some to have started the trend with all four domestic automakers offering a variety of competing models.

From 1964 until midway through 1973, the GTO was related to the mid-sized Pontiac Tempest/LeMans. The 1974 GTO was a one-year only optional package available on the compact-sized two-door Pontiac Ventura.

The GTO model was revived from 2004 to 2006 model years as a captive import for Pontiac, a left-hand drive version of the Holden Monaro, itself a coupé variant of the Holden Commodore.

The first Pontiac GTO was an option package for the Pontiac Tempest, available with the two-door coupe, hardtop, and convertible body styles. The US$295 package included a 389 cu in (6 l) V8 rated at 325 bhp (242 kW) at 4800 rpm with a single Carter AFB four-barrel carburetor and dual exhaust, chromed valve covers and air cleaner, seven-blade clutch fan, a floor-shifted three-speed manual transmission with Hurst shifter, stiffer springs, larger diameter front sway bar, wider wheels with 7.50 × 14 redline tires, hood scoops, and GTO badges. Optional equipment included a four-speed manual, Super Turbine 300 two-speed automatic transmission, more powerful "Tri-Power" carburetion (three two-barrel Rochester 2G carburetors) rated at 348 bhp (260 kW), metallic drum brake linings, limited-slip differential, heavy-duty cooling, ride and handling package, and the usual array of power and convenience accessories. With every available option, the GTO cost about US$4,500 and weighed around 3,500 lb (1,600 kg). A tachometer was optional, and was placed in the far right dial on the dash.